|
The Linksys Broadband Router with 2 Phone Ports is a kind of "splitter" for your
Internet connection. Just connect your DSL or Cable Modem to the Router, and all
the computers in your home or office can share the Internet -- all at the same time.
The built-in 3-port switch lets you attach three local PCs directly, or daisy-chain
out to more hubs and switches as your network grows.
The two standard telephone jacks on the Router enable our high-quality feature-rich
telephone service through your high-speed connection even while you're surfing the
Internet. Each phone jack operates independently -- like having two phone lines.
|
STEP 1
Connect ethernet cable from your PC to one of the 3 LAN ports of the router. Then
connect your cable of DSL modem's Ethernet cable to the Router's Internet port.
If necessary, disconnect the RJ-11 telephone cable of your telephone from the telephone
wall jack. Then connect that end to the Router's Phone 1 port. If you have a second
telephone plug that into Phone 2 port. Now, power up your PC, Cable and DSL modem
and your Linksys.
|
|
STEP 2
You will need the setup instructions provided by your Internet Service Provider
(ISP). If you do not have this information, then contact your ISP before continuing.
The instructions from your ISP tell you how to setup your PC for Internet access.
Because you are now using the Router to share Internet access among several computers,
you will use the setup information to configure the Router instead.
|
|
STEP 3
Make sure that your PC's Ethernet adapter is set to 'Obtain an IP Address Automatically'
Open your browser and enter 192.168.15.1. When the login screen
appears, enter 'admin' for username and 'admin'
for password.
|
|
STEP 4
A setup page will appear. Choose the Internet connection type depending on how your
ISP assigns you your Internet Protocol(IP) number. When you have finished your settings
click on 'Save Settings'. When your Router Setup screen comes back
up, you should be able to browse the Internet from your PC. If not, contact your
ISP.
|
|
STEP 5
Next, choose from the main menu 'Voice' and then Line1.
Enter your virtual number into the User Id: field
and SIP password into the Authenticate Password:
field. Enter sip.JTKVoIP.net into Registration/Proxy
Server: field.
Repeat Step 5 for line 2.
|
|
STEP 6
For the best voice quality, leave the Voice Quality: at default.
If you have limited bandwidth choose G.729. Do not choose G.723
as it is not supported by JTK.
|
|
STEP 7
Save settings.
|
 |
s
|